Getting Started

In this quick manual we will explain how to setup Clickers with your iPhones. It will allow you to do remote control and automation on your iPhones out-of-the-box.

You need at least one Clicker to start. If you don't have it yet, you can make the order here: https://nomixclicker.com. Whether you have 1 Clicker or 20, the process remains the same.

Small tip: if you plan to order more Clickers in the future, ordering them all at once will save you money on shipment costs and quantity discounts.

Watch our Unboxing video, or just follow the instructions below.

1. Unpack everything. Each set contains: 1 Clicker, 1 Camera Adapter, 1 microUSB adapter. There is a Device ID on the bottom of every Clicker.

2. Prepare your iPhones. Open Settings → Accessibility → Touch. Enable AssistiveTouch. As a result, you should start seeing a grey circle at the border of the screen. Then go to Display & Brightness and set Auto-Lock to "Never".

3. Install NMX Viewer app on each iPhone. AppStore link: https://apps.apple.com/us/app/nmx-viewer/id6746079971. Enter device ID from a Clicker in the app and start broadcasting.

4. Log in to Panel with your email and the password we've sent you. Open your device on the website. You should see your phone's screen.

5. Setup WiFi on the Clickers. You can skip this step if you've sent us WiFi name and password beforehand.

6. Connect each Clicker to an iPhone: first plug in Camera Adapter, then power cable, then Clicker itself. It is important that you connect Clicker with the same device ID as entered in NMX Viewer.

7. Wait 1-3 minutes. Green light on the Clicker should start blinking and after some time it will turn on infinitely. Note that the first launch takes a bit longer as it does the firmware update. After the light is turned on infinitely, you should see "CLICKER CONNECTED" indicator in Panel, which means you can now control your iPhone.